Cost guideLead platforms

Electrical lead generation: jobs that ring only you

Every route to electrical leads has a price on a page and a different price per job won. Here is the sum for a UK electrician, with each figure's source.

Grid scan dashboard for electrician Cirencester showing JI Electrical at average position 1 and 100 percent of points in the top three, scanned 14 October 2026
The grid scan dashboard for JI Electrical, “electrician cirencester”, scanned 14 October 2026: average position 1 and every point in the top three on a 9 by 9 grid over a 4.8 km radius.

Lead prices for electricians sit on several websites and no two agree. A UK electrician comparing them is usually comparing one platform's own fee with another's estimated range, which is not a comparison at all.

The useful question is smaller and harder to answer: what does a booked job cost you through each route? This guide takes every price from its source, says where it is only an estimate, and works the sum on labelled figures so you can replace them with your own diary.

Where an electrician's leads are priced, and by whom

Every published price for electrical leads in the UK is either a platform's own membership fee or a third party's estimate, and the two should not be mixed in one sum.

£0, £30, from £59Checkatrade's Free, Approved and Growth plans per month, read from its own page on 19 November 2026
£5 to £30+Whito's estimate for a Rated People lead, small job to large job, July 2026 study
£15 to £40Whito's estimate for a MyBuilder lead, paid when a homeowner picks you to quote

Only the first figure comes from the seller. Checkatrade's own pricing page lists a Free plan at £0, Approved at £30 a month and Growth from £59 a month, with a footnote that memberships are for 12 months. It prints no per-lead price. The other two come from Whito's electrician leads study, written by a marketing firm that sells its own lead work, and the page itself says to confirm rates with each platform. Trade2Base's June 2026 comparison gives a different picture again: £800 to £1,200 a year for Checkatrade and "£30 to £50 or more" for a large MyBuilder lead. Treat the spread as the finding. Nobody outside the platforms can state what your leads will cost.

JI Electrical homepage with the headline Electrician in Cirencester and the Cotswolds over a kitchen photo and a contact button
The JI Electrical homepage, a Sitework build: the trade and the towns in the headline, over a photo of finished work.

Why the Checkatrade figures disagree

Three sources put a year of Checkatrade at £360 or more, £720 to £2,160, and £800 to £1,200, and each is arithmetic on a different thing.

The £360 is Approved at £30 a month over its 12-month term, from the platform's own page. Whito's "£60 a month at the basic end and £120 to £180 in competitive areas" is £720 to £2,160 over twelve months, and it is an estimate for plans that add leads. Trade2Base's £800 to £1,200 a year for a sole trader is a third figure with no source printed beside it. None of them is wrong in the sense of being invented. They describe different plans, different areas and different dates, which is why the only price you can budget on is the one on your own quote, read before you sign a 12-month term.

The same caution applies to every lead price in this guide. When a figure comes from a party that sells the same service, or prints no method, it goes in the sum as a labelled input and not as a fact about your area. Write the quote you are given next to the range, and ask what the plan includes in leads, not only in listings.

Twenty leads, four jobs: the sum behind every quote

A lead price tells you what you pay to be told about a job. A job price is the lead price divided by the share you win.

One UK electrician, a labelled worked example

Leads bought in a month20
Price per lead (inside Whito's range)£20
Spend£400
Jobs won at one lead in five4 jobs
Cost per job won£100
Same spend, one lead in ten won2 jobs, £200 each

The £20 is a point inside Whito's published range. The win rates and the 20 leads are my inputs for the example. They are not a forecast, and your own count replaces them.

Whito makes the same point with the same £20 and one-in-five figures. The reason it matters is that paying for a lead and winning the job are two events, and only the second pays you. Trade2Base says MyBuilder works on credits spent when you express interest in a job, so the spend happens before any answer from the customer.

WhatsApp chat with Rob at Belmax Builders: he says they have had 5 or 6 job leads in the last couple of weeks, and lists an extension, a full refurb, a part refurb, little jobs and a garage
Rob at Belmax Builders on WhatsApp, in his own words, listing the jobs behind five or six leads in a couple of weeks. Belmax also had a new website and Google Maps work in the same period, so this is not credited to articles alone.

Want to see a site built for your trade? Get a free mockup

Small jobs and big jobs are priced differently

Whito's figures put a Rated People lead at £5 to £10 for a small job and £20 to £30 or more for a large one, so the platform charges more where you earn more.

That is worth reading twice. A pay-per-lead platform does not sell you "electrical work". It sells you a job at a price tied to the job's size, and the cheap leads are the small ones. An electrician chasing five-pound leads for socket repairs is buying the work least likely to cover a day in the van. The jobs that carry a rewire, a consumer unit change or an EV charger sit at the expensive end, and they are the ones worth testing first.

A membership turns that round. Checkatrade's Growth plan lets you choose how many leads you want for a fixed monthly cost, according to its page, and the page does not say what any one lead costs. At £59 a month over its 12-month term, the lowest Growth price comes to £708. What you cannot tell from the page is how many of those leads are the kind you want.

What an owned route costs instead

Google says there is no way to pay for a better local ranking, so the only cost of the Maps route is the work that earns the position.

Google Business Profile Help says local results rest on relevance, distance and prominence, and that prominence draws on reviews, ratings and links to your business. It adds that you cannot request or pay for a higher place. That cuts both ways. Nobody can sell you a guaranteed spot, and nobody can outspend you into one. A profile with a full service list, a steady supply of real reviews and a site that backs it up earns the position slowly, and it stays yours when you stop paying anyone.

RouteWho gets the enquiryWhat it costsWhat you can read afterwards
Checkatrade membershipThe platform's page, then you£0, £30 or from £59 a month, 12-month termCalls and booked jobs, if you log them
Pay-per-lead (Rated People, MyBuilder, Bark)You, once you pay for the leadWhito's range: about £5 to £40 a leadLeads bought against jobs won
Google AdsYou, per clickA click price you cap, with no electrician figure I could openClicks, calls, jobs, if tracked
Google Maps profile and your own siteYou, directlyWork and time, no per-lead feeCalls and profile views, in Google's own data

Prices are the sources named above, read or searched on 19 November 2026. The Google Ads row has no electrician click price because none was opened: Google Ads Help only confirms that your maximum bid caps what a click can cost.

Google Ads Help says a click will not cost more than the maximum cost-per-click you set. That makes ads the one route where you set the ceiling yourself, and the one where I have no sourced electrician figure to offer. For the method with real UK numbers, the plumbing version is in Google Ads for plumbers: cost per job against Google Maps.

WhatsApp messages from Jack at JI Electrical after seeing his map ranking: it would be good to extend to Stroud, Cheltenham and the surrounding villages, and he asks if he is number 1 in most places
Jack at JI Electrical on WhatsApp after seeing his Maps grid: he wants to extend to Stroud, Cheltenham and the surrounding villages, and asks whether he is number 1 in most places.

Which electrician should buy which lead

The right route follows your diary and your customers, not the cheapest line on a price list.

You have empty weeks this month Test a pay-per-lead platform with a cap you can lose. Buy a small batch, log every lead against a job, and stop when the cost per job is clear.
You want reviews and a listing quickly The free Checkatrade plan costs nothing to try. Keep the same reviews on your own Google profile so they are not locked to one directory.
Your work is landlords, repeat clients and bigger installs Put the effort into your own profile and page. A returning customer searches your name. A first-time rewire customer searches your town. Both land on what you own.
You cover several UK towns Set the Google profile up as a service-area business. Google's service area guidance allows up to 20 service areas, and edits can take up to 48 hours to show.

The ten-minute count before you buy another lead

Five records tell you which route is paying, and none of them needs a tool you do not have.

Write down where every enquiry came from. Ask each caller how they found you and keep a running list.
Match leads to jobs. A lead you cannot trace to a booked job is a cost, not a result.
Divide by the share you win. Spend divided by jobs won is your own cost per job, whatever the platform quotes.
Check the term before you sign. Checkatrade's page says memberships are for 12 months, so a bad quarter is a long one.
Check your Google profile in a private window. Search your trade and town, and see which businesses sit above you.

Once you have a month of those records you hold the one number that no price list prints: what a job costs you through each route. If you would like it compared with where you sit on the map now, the Google Maps check shows who is above you for your trade and town, and the electrician website design page covers what a site that backs the profile includes.

Electrical lead generation questions

How much does electrical lead generation cost in the UK?

No single figure is published. Whito estimates £5 to £40 a lead depending on platform and job size, and Checkatrade's own page lists £0, £30 or from £59 a month for membership. A job costs the lead price divided by the share of leads you win.

Is Checkatrade worth it for UK electricians?

That depends on traced jobs, not on the fee. Its pricing page shows Free at £0, Approved at £30 a month and Growth from £59 a month on 12-month terms. Log the jobs it brings for a quarter and divide.

Are Rated People and MyBuilder leads worth buying?

They can be, when you win enough of them. Whito puts Rated People at £5 to £30 or more and MyBuilder at £15 to £40, and neither platform's own page was opened. One lead in five at £20 works out at £100 a job.

Can I pay Google to rank higher on Maps?

No. Google Business Profile Help says there is no way to request or pay for a better local ranking. Position rests on relevance, distance and prominence, which includes reviews and links.

What is the cheapest way for an electrician to get enquiries in the UK?

The route with no per-lead fee is your own Google profile and website, which cost work and time. It is slower to start than a bought lead, and it stays yours when you stop paying anyone.

Sources

  1. Checkatrade's own pricing page, read 19 November 2026, for plan prices and the 12-month term.
  2. Whito's electrician leads study, page updated 16 November 2026, for third-party lead price estimates and the cost-per-job division. A vendor source, used as an estimate only.
  3. Trade2Base's June 2026 comparison, dated 8 June 2026, for the Checkatrade and MyBuilder ranges and how MyBuilder charges.
  4. Google Business Profile Help, article 7091, for the three local ranking factors and the statement that rank cannot be paid for.
  5. Google Ads Help, article 6326, for the maximum cost-per-click cap.
  6. Google's service area guidance, article 9157481, for the 20 service areas limit and the 48-hour edit delay.
Our work

The same format, on client websites

This article is built the way we build articles for clients: a straight answer first, then the evidence. Here is the format on three client sites.

JI Electrical article: House rewiring in Cirencester, full or partial?
JI Electrical
Belmax Builders article: Loft conversion cost in Rugby, 2026 guide
Belmax Builders
Tidal Drift article: Replace conservatory with extension, cost and route
Tidal Drift
“The process was simple and stress free. I’ve since started Google ads and the conversion rates on the clicks, due to how Jacob designed the site, have been amazing.”
Lewis TurnleyRight Turn Removals, Brighton · Google review
“A great website built by Jacob who understood from the outset what needed to be done. There were few to no tweaks needed and I am very happy with the outcome.”
CraigCS Tiling Sussex, Hove · Google review
“The transformation of my website is incredible and I feel safe in the knowledge that all the legal boxes and permissions have been ticked.”
BryonyCeremonies by Bryony · Google review
Enquire now

Win work without renting leads

A lead site sells the same customer to several firms, and the phone goes quiet the day you stop paying. Articles on your own website keep bringing people who ring you alone.